Schwalb Produkte
Schwalb Produkte

Roller Conveyors and Roller Tracks

Our staff will be pleased to give advise about our roller conveyors and roller tracks.

Schnellkontakt

Sie haben Fragen oder wünschen weitere Infos?

Hier erreichen sie unser Team von
Mo. bis Fr. 08.00 bis 17.00 Uhr


Roller Conveyors

Small Roller Conveyors
Series 19ST
with steel carrying rollers
zinced
ø 20 + 30 mm

Light-Duty Roller Conveyors
Series 11KU
with plastic carrying rollers
ø 50 mm

Light-Duty Roller Conveyors
Series 11ST
with steel carrying rollers
zinced
ø 50 mm




Roller Tracks

Universal Roller Tracks

Colli Roller Tracks

Pallet Roller Tracks


Experience our extended Product Range of Roller Conveyors and Roller Tracks

We produce not only single carrying rollers but also complete conveyor tracks with a frame, made from zinced U-profile. The conveyor tracks are available with plastic or steel rollers (steel rollers also available as heavy-duty version). Our product range "conveyor technique" is complemented by trestles, belt guide rollers, colli roller tracs, pallet roller tracks and universal roller tracks.

Small Roller Track "19KU"

For the small roller tracks "19KU" we use zinced U-profile 20/60/20/2. Assembled between the profile are plastic rollers "TKL", either with a roller diamter 20 mm or 30 mm, with a continuous, zinced axle with external thread, which is screwed on both sides. For the small roller tracks with plastic carrying rollers we also offer fitting curves (inner radius 800 mm).

Small Roller Track "19ST"

For the Small Roller Tracks "19KU" we used zinced U-profile 20/60/20/2. Assembled between the profile are steel carrying rollers "TSL", either with diamter 20 mm or 30 mm with continuous axle with external thread, which are screwed on both sides. For the small roller tracks with steel carrying rollers we also offer fitting curves (inner radius 800 mm).

Light-Duty Roller Track "11KU"

The light-duty roller tracks "11KU" consist of zinced U-profile 20/60/20/2 with plastic carrying rollers "TKL", roller diamter 50 mm, with tubular axles that are screwed on both sides. For the light-duty roller tracks "11KU" we also offer fitting curves (inner radius 800 mm).

Light-Duty Roller Track "11ST"

The light-duty roller tracks "11ST" consist of zinced U-profile 20/60/20/2 with steel carrying rollers "TSL", roller diamter 50 mm with tubular axles that are screwed on both sides. For the light-duty roller tracks "11ST" we also offer fitting curves (inner radius 800 mm).

Light-Duty wheel conveyor "11KRK"

U-profile made from steel sT37-2 (EN10305-3), galvanised, 20/70/20/2 with conveyor wheels made from plastic series KRK048/8 with axle diamter 8 mm, staggered and screwed. The bearingis made from plastic with one row of steel balls. Possible versions are "aluminium frame" or a stainless steel version.

Light-Duty wheel conveyor "11SBK"

U-profile made from steel ST37-2 (EN10305-3), galvanised, 20/70/20/2 with zinced conveyor wheels made from steel, series SBK048/8 with axle diameter 8 mm, staggered and screwed. The bearing is made from sheet steel with one row of steel balls. This light-duty wheel conveyor is also available with an aluminium frame.

Omniwheel Conveyor "11ASR"

U-profile made form ST 37-2 (EN 10305-3), galvanised, 20/70/20/2 with plastic omniwheels series 03/AWR048, straggered and screwed. The wheels have a plain bore. If requested, these conveyors can also be provided with an aluminium frame.

Heavy-Duty Roller Conveyor "05/50"

In a galvanised U-profile, made from steel ST37-2 (EN10305-3), 40/80/40/3 carrying rollers made from zinced steel tube 50x1,5 mm, ST37-2 (EN10305-3) are assembled. The spring-mounted axle is made from rack-drawn steel ST37 K. The rollers have zinced sheet steel  bearing housing with ball bearings.

Heavy-Duty Roller Conveyor "05/80"

In a sendzimir galvanised U-profile, made from steel ST37-2 (EN10305-3), 135/65/29/5, carrying rollers made from zinced steel tube 50x1,5 mm, ST37-2 (EN10305-3) are assembled. The axle is made from rack-drawn steel ST 37 K, has a diameter of 20 mm and an internal thread M12. Sheet steel bearing housing with ball bearings are used. The heavy-duty roller conveyor is designed for a load up to 1000 kg/m, depending on track width, center distance and trestel distance.

Stainless Steel Heavy-Duty Roller Conveyor, antistatic "05/50NAS"

U-profile made from stailess steel 1.4301, 40/80/40/3 with antistatic carrying rollers diamter 50 mm for medium loads, made from stainless steel tube 50x1,5 mm, 1.4301. The carrying rollers have press-fitted plastic bearing housings with stainless steel deep groove ball bearings and stainless steel nuts. These heavy-duty roller conveyors can be used for loads up to 200 kg/m (reference value).

Trestles and Roller Blocks

The tresles "15Z" (bipod) have a robust square tube construction with swivel-joint plates for adjust them according to the slope of the roller track. Via telescopic legs the height is infinitely variable. The trestles "15D" (tripod) consist of a round tube construction with lateral screw locking to safe the supported roller tracks. These trestles are also infinitely variable.

The roller blocks "18D" (tripod) consist of a robust square tube construction, that is infinitely variable via telescopic supports with clamping levers. Surface: top part zinced, bottom part painted in RAL 5015 blue. Including steel carrying roller "TSL50", on request also available with plastic carrying roller.

The double-stand trestles "15ZM" are supposed to be installed stationarily and are designed for medium loads. They are produced from steel square tube 40x40x2 mm made from ST37-2 (EN10305-3) and vanished in RAL 5015 blue. The swivel is zinced. The trestles can be height-adjusted via telescopic feed and then be fixed with a screw.

The double-stand trestles "15ZS" are supposed to be installed stationarily and are designedfor heavy-duty roller conveyors and heavy loads. They are produced from steel sqare tube 50x50x4 made from ST 37-2 (EN10305-3) and vanished in RAL 5015 blue. The swivel is zinced. The trestles can be height-adjusted via telescopic feed and then be fixed with a screw.

Universal Roller Tracks "13KU", "13KUS", "13ST" and "13STS"

Assembled in these universal roller tracks are normal conveyor rollers series "KRK" resp. "SBK" or flange conveyor rollers series "KRKS" resp. "SBKS" with internal thread axle, tighly screwed on both sides in zinced U-profile 28/46/2.

Colli Roller Tracks "14KU" and "14KUS"

Inserted in the colli roller tracks are steel rollers with ball bearings and a roller shell made from blue polypropylene with diamter 54 mm. Optionally available with or without flange.

Pallet Roller Tracks "16N" and "16S"

Assembled in a U-profile 80/55/3 are the carrying rollers "TSL50", on request, the pallet roller tracks can be delivered with carrying rollers "TSL50" with a flange. Possible are different track lengths and roller pitches.

Pallet Roller Tracks "17"

In a zinced U-profile 130/65/3 carrying rollers "TSL60" are assembled. These tracks are usually used in environments, where the carrying rollers built in the track series "16" are too narrow and a wider running surface is required. Different track lengths are possible though the  lengths need to be divisible by 33,3 mm.

If you require Roller Conveyors and Roller Tracks, decide for Schwalb Roller Conveyors and Roller Tracks

All product information and dimensions can be found in our catalogue chapter conveyor tracks and conveyor rollers ...

You wish to learn more about our product variety? Please have a look at our overview of all our wheels and castors.